|
SOHO
Wireless Internet camera
INTRODUCTION
This Camera can be connected directly to an Ethernet
or Fast Ethernet network and also supported by the
wireless transmission based on the IEEE 802.11g
(54Mhz)standard. Compared to the conventional PC
Camera, the Wireless Internet Camera features a
built-in CPU and web-based solutions that can
provide a cost effective solution to transmit
real-time high-quality video images and sounds for
monitoring. The Wireless Internet Camera can be
managed remotely, accessed and controlled from any
PC/Notebook over the Intranet or Internet via a web
browser.
|
|
The simple installation procedures and web-based
interface allow you to integrate it into your
network easily. With comprehensive applications
supported, the Wireless Internet Camera is your best
solution for remote monitor, high quality, and high
performance video images.
|
|
APPLICATION OF THE CAMERA:
The Wireless Internet Camera can be applied in wide
variety of applications. With the built-in CPU, it
can work as a standalone system that provides a
web-based solution transmitting high quality video
images and sounds for monitoring purposes. It can be
managed remotely, accessed and controlled from any
PC desktop over the Intranet or Internet via a web
browser. With the easy installation procedure,
real-time live images will be available.
In addition, once the Wireless Internet Camera is
installed coupled with the IPView SE application,
you can further expand the scope of the Wireless
Internet Camera. The following section will provide
the typical applications for the Wireless Internet
Camera along with the IPView SE application, and
also includes some basic knowledge to assist in the
installation and configuration of the Wireless
Internet Camera.
Applications:
Compare our best "Buy
Now" price with other Shops for same specification
Wireless 802.11 g IP
Cameras.
(Brand
new and boxed . Price includes VAT)
Features
and Benefits:
|
Simple To Use
The Wireless Internet Camera is a standalone
system with built-in CPU requiring no
special hardware or software such as PC
frame grabber cards. The Wireless Internet
Camera supports both ActiveX mode (for
Internet Explorer users) and Java mode (for
Internet Explorer and Netscape Navigator
users). Therefore, all that is required is a
web browser software such as Internet
Explorer 5.0 or above or Netscape 6.0 or
above. Just plug and view the picture from
your Wireless Internet Camera with a valid
IP Address.
Support Variety of Platforms
The Wireless Internet Camera supports TCP/IP
networking, SMTP e-mail, HTTP and other
Internet related protocols, and can be
utilized in a mixed operating system
environment such as Windows, Unix, and Mac.
It can be integrated easily into other
www/Intranet applications.
Web Configuration
Applying a standard web browser, the
administrator can configure and manage the
Wireless Internet Camera directly from its
own web page via the Intranet or Internet.
Up to 64 users name and
password are permitted with privilege
setting controlled by the administrator. |
|
Remote
Utility
The powerful IPView SE application assigns
the administrator with a pre-defined user ID
and password, allowing the administrator to
modify the Wireless Internet Camera settings
from the remote site via Intranet or
Internet. When new firmware
is available, you can also upgrade remotely
over the network for added convenience.
Users are also allowed to monitor the image,
and take snapshots.
Broad Range of Applications
With today’s high-speed Internet services,
the Wireless Internet Camera can provide the
ideal solution for live video images over
the Intranet and Internet for remote
monitoring. The Wireless Internet Camera
allows remote access from a web browser for
live image viewing and allows administrator
to manage and control the Wireless Internet
Camera anywhere and any time in the world.
Apply the Wireless Internet Camera to
monitor various objects and places such as
homes, offices, banks, hospitals, child-care
centers, amusement parks and other varieties
of industrial and public monitoring. The
Wireless Internet Camera can also be used
for intruder detection; in addition, it can
capture still images for archiving and many
more applications.
|
|
| Features : |
|
|
| Specification: |
|
Camera
specification |
| |
Image Sensor
|
|
|
| Sensor resolution |
640 x 480 pixel
|
| Sensor type |
Color CMOS
Sensor |
| Lens |
f: 6.0 mm ,
F: 1.8 |
|
|
|
Video
|
|
|
| JPEG still image compression |
|
| Image frame rate |
QCIF@30fps,25fps@CIF, 10fps@VGA |
| Compressionrate selection |
5 levels, very low, low, middle,
high, very high |
| Frame rate setting |
1, 5, 7, 15, 20, auto (depends
on the video format) |
| Video resolution |
160x120, 320x240, 640x480 |
|
Automatic
Gain control |
Yes |
|
Automatic
Exposure |
Yes |
|
Automatic
White Balance |
Yes |
|
|
|
Communication
|
|
|
|
LAN port |
RJ-45, 10/100M
auto-sensed, AUTO MDI-X |
|
Wireless
LAN(for wireless only) |
Built-in 802.11g wireless LAN |
|
Communication protocol |
HTTP, FTP, TCP/IP, UDP, ARP,
ICMP, BOOTP, DHCP, PPPoE, SMTP,
DDNS, UPnP |
|
|
|
System |
| |
|
CPU |
RDC R2880 |
|
RAM |
8M Byte |
|
Flash ROM |
2M bytes |
|
¡D OS |
RTOS |
|
|
|
Software |
| |
|
Browser |
Internet Explorer 5
.0 or above¡B Netscape 6.0 or above |
|
Application
Software |
IPview application software
(for PC) |
|
|
|
|
|
Rear Panel:
Screw Hole
Located on the top/bottom panel of the camera, the screw
hole is
used to connect the camera stand onto the camera by
attaching the
screw head on the camera stand into the screw hole of the
camera.
|
Attaching the Camera to the Stand
The Wireless Internet Camera comes with a camera stand
(optional) with a swivel ball
screw head that can be attached to the Wireless Internet
Camera's bottom screw hole.
Attach the camera stand to the Wireless Internet Camera and
station it for your application.
There are three holes located in the base of the camera
stand allowing the Wireless Internet Camera to be mounted on
the
ceiling or any wall securely.
 |
Installation Softwares:
It is very simple. Insert the
CD-ROM into the CD-ROM drive to initiate the autorun
program. Once completed, a menu screen will appear as
below:
System Administration software:
The Management window contains the information of
your
configuration. Click the items in the left column to view your
settings, including: System, Video, Wireless, Network, and User.
IPView SE is responsible for
the management of preview,
configuration, and searching of each camera.
It is designed with a user-friendly interface for ease of control
and
navigation requirements as illustrated below.
IPView SE control panel:
Motion Setting:
You can adjust the sensitivity
level and choose the Invoke Alarm
options to work with motion detection function.
Besides the Alarm Beep, Send Email can be enabled when motion
detected.
The user can define the time interval to Send E-mail.
Adjust the Recording Setting:
There are three ways to start recording image - Motion Record,
Schedule Record & Manual Record.
 Motion
Record
This option allows the camera to trigger recording by motion
detected. You can adjust the sensitivity level and choose the
warning options when motion is detected from motion setting.
 Schedule
Record
This option allows the camera to trigger recording as schedule
defined. The schedule is set by date or weekday.
 Manual
Record
This option allows the camera to trigger recording manually.
SECURITY:
To ensure the highest security and prevent unauthorized
usage of the Wireless Internet Camera the Administrator has
the exclusive privilege to access the System Administration
for settings and control requirements to allow users the
level of entry and authorize the privileges for all users.
The Wireless Internet Camera supports multi-level password
protection and access to the Wireless Internet Camera is
strictly restricted to defined the user who has a “User
Name” and “User Password” that is assigned by the
Administrator.
The administrator can release a public user name and
password so when remote users access the Wireless Internet
Camera they will have the right to view the image
transmitted by the Wireless Internet Camera.
|
Item Included in the Package:
- SOHO Wireless Internet Camera (with external
antenna)
- Installation CD-ROM
- Quick Installation Guide
- AC power adapter suitable for your country’s
electric power One Camera Stand
- RJ-45 Ethernet Cable
- Adjustable mounting bracket
|
A Frequently Asked Questions:
Internet Camera Features
Q: What is an Internet Camera?
A: The Wireless Internet Camera is a standalone system
connecting directly to an Ethernet or Fast Ethernet network
and supported by the wireless transmission based on the
IEEE 802.11g standard. It is different from the conventional
PC Camera, the Wireless Internet Camera is an all-in-one
system with built-in CPU and web-based solutions providing a
low cost solution that can transmit high quality video
images for monitoring. The Wireless Internet Camera can be
managed remotely, accessed and controlled from any
PC/Notebook over
the Intranet or Internet via a web browser.
Q: What is the maximum number of
users that can be allowed to access the Wireless Internet
Camera simultaneously?
A: Maximum number of users that can log onto the Wireless
Internet Camera at the same time is 64. Please keep in mind
the 79 overall performance of the transmission speed will
slow down when many users are logged on.
Q: What algorithm is used to
compress the digital image?
A: The Wireless Internet Camera utilizes the JPEG image
compression technology providing high quality images for
users. JPEG is adopted since it is a standard for image
compression and can be applied to various web browser and
application software without the need to install extra
software.
Q: Can I change the wireless
antenna attached to the Wireless Internet Camera?
A: The wireless antenna can be changed for a variety of
reasons such as extending the wireless transmission range,
however, please consult authorized distributors before
attempting as the connectors must be SMA connector type.
Q: What is the wireless
transmission range for the Wireless Internet Camera?
A: Generally the wireless distance can go up to 100 meters
indoors and up to 300 meters outdoors. The range is limited
by the number of walls, ceilings, or other objects that the
wireless signals must pass through. Typical ranges vary
depends on the types of materials and background Radio
Frequency (RF) noise in your home or business and the
configuration setting of your network environment.
Internet Camera Installation
Q: Can the Internet Camera be used
out-doors?
A: The Wireless Internet Camera is not weatherproof. It
needs to be equipped with a weatherproof case to be used
outdoors and it is not recommended.
Q: What network cabling is required
for the Wireless Internet Camera?
A: The Wireless Internet Camera uses Category 5 UTP cable
allowing 10 Base-T and 100 Base-T networking.
Q: Can the Wireless Internet Camera
be setup as a PC-cam on thecomputer?
A: No, the Wireless Internet Camera is an Internet Camera
used only on Ethernet and Fast Ethernet network and
supported by wireless transmission.
Q: Can the Wireless Internet Camera
be connected on the network if it consists of only private
IP addresses?
A: The Wireless Internet Camera can be connected to LAN with
private IP addresses.
Q: Can the Wireless Internet Camera
be installed and work if a firewall exists on the network?
A: If a firewall exists on the network, port 80 is open for
ordinary data communication. However, since the Wireless
Internet Camera transmits image data, the default port 8481
is also required. Therefore, it is necessary to open port
8481 of the network for remote users to access the Wireless
Internet Camera.
|
If you
need further information download
User Manual
(PDF
Format, 5.8 MB)
|
|
|
|
