Features:

  1) The LCD screen is rotatable for better view angle when stands on table

  2) Color CMOS camera CA200, with sound trigger feature, the trigger level can be adjusted with the
      tuning in camera

  3) The monitor can be operated in stand by, auto, and manual modes. In stand by mode, the monitor can
       be activated if motion detected or sound over pre-set level

  4). Monitor will beep to alert user when motion detected or sound over preset level

  5) Each wireless receiver can work with up to 3 Wireless cameras.

  6) A/V output port can be connected to VCR, TV

  7) Transmitting over 200m from camera in open area.

  8). Has a switch to turn on/off the night LED

  9)  Wireless camera can be operated with rechargeable battery pack for long time portable use

10) Low battery indicator to remind user to replace the batteries in time

11) Monitor can be in portable use about 4 hours with 4 cell alkaline/NIMH rechargeable batteries

12) Both camera and monitor can be table stand and wall/ceiling mounting

Standard Approval: CE & FCC 
 

Monitor:

  1). Screen : 1.8" complete new TFT LCD
  2). Frequency Range: 2.41-2.47GHZ
  3) Display resolution: 577(H) x 234(W)(dot)
  4) Signal/Noise Ratio: 40dB
  5) Operation Temperature: -10°C~+40°C
  6) Humidity: less than 85%
  7) Contrast Rate: 150/1
  8) Brightness: 250 cd/㎡
  9) Power Consumption: 350mA
10) Signal Source: 2.4GHz wireless A/V, PIR and sound   trigger
11) Overall size: 2.95"W x 4.86H x 1.81"

Package included:

Both Camera and LCD Monitor can be mounted
either on Wall or on desktop